Roofing across various sectors and their applications

5491
Roofing across various sectors
Roofing across various sectors

The roof is a commercial or infrastructural building’s first line of defense from natural hazards such as wind, rain, fire, hail, ice, snow, and extreme heat. It is also the most vulnerable part of your building. Every day, your roof is exposed to weather and other elements that may contribute to decay and deterioration, increasing the risk of damage to the roof itself and the contents below it.

A high-quality roof offers assurances that a low-quality roof won’t provide. Weather is the principal challenge as far as roofs go, and our climate has become increasingly intense in many parts of the country. High winds, heavy rain, hail storms, and heavy snowfall all take their toll. A lesser-quality roof may not stand up to the rigors of your regional weather. It’s essential that a roof keep out all water and moisture. Your roof won’t serve its function sufficiently well if it can’t do that. Part of the problem regarding moisture is that you may not know if your current, older roof is leaking – and that’s a problem. Any amount of moisture can result in damage to the roof’s rafters and structural support, as well as to other areas of your property, which could include mould growth and other complications.

Energy-efficiency of a good quality roof is another important attribute. Estimates run as high as 50 percent for energy loss due to inefficient roofs. This can apply as much to the loss of cool air in hot summers as it does to heat loss in winter. Think of that in terms of money out the window. It’s an unnecessary loss. Fortunately, solutions do exist to improve your roof’s energy efficiency. The Roofing industry is in complete motion. Demand for roofing and siding installation and maintenance has contributed a lot to this growing demand.

Below are some of the roofing application around various sectors

Roofing for Airport:

As more and more airports are modernizing their structures with changing times an important factor to consider is that of the roofing material that will be used on them. There are several factors to consider when deciding which roofing material or roof design for an airport. The overall geometrical design is perhaps the most important one. The airport industry is hesitant to look out for the acoustical design as no one wants to create additional noise inside the building because the planes landing and taking off. Roofing should be designed in such a way that it will deflect as much noise as possible away from the inside of the building. Additionally, weather conditions are important to consider. Airports also require some safety systems to be in place regarding the roofing design. Fire control systems also need to be in place in order that highly durable and fire-resistant material should be used. One of the demanding trends in the latest time is the growth in demand of multi-zip roofing systems. This demand has a direct correlation with the aviation sector’s needs.  It is a screwless and jointless roofing solution that could be molded to almost any kind of form. Presently, Chandigarh, Tirupati and Visakhapatnam have installed this roofing solution.

Roofing for Airport

Roofing for Commercial buildings:

The correct implication of a roofing system is pivotal for a larger life shelf of a commercial building. An estimation of all the considerations involved in the installation of that roof is very important. With everybody focusing on going environmentally friendly or green these days, it is no surprise that many office buildings are now following the same trend. Planting a ‘green roof’ can help keep the structure cool inside, which will reduce reliance on air-conditioning systems as well. Thermoplastic Roofing is also a preferred new age roofing system that could be considered. These roofing systems are among the fastest growing commercial roofing systems. The material used for this type of solution is made of a  durable material which enables a low-temperature flexibility and a high-temperature tolerance. This roofing solution is highly resistant to ultraviolet, ozone and chemical exposure.

Roofing for Commercial buildings

Roofing for Warehouses:

Courtesy to digitization several new warehouses are being opened along the country. These warehouses are adopting various new styled roofing system to meet their expenses as well as for innovation. Roofing sheets which are galvanized with zinc, which provides resistance against corrosion and harmful effects of air pollution seem to be the popular choice in the sector. These sheets are stringently tested under quality parameters and proven to be highly durable. These sheets are being extensively installed in warehouses.

Roofing for Warehouses

Roofing for Agricultural Units:

In regards to the agricultural units, several new modeling and innovations are taking place. Highly versatile covering and cladding solutions for agricultural buildings are being installed worldwide. Ranging from light transmitting coverings to opaque roofing solutions, every new type of models are being implied and tested upon. Several specially designed roofing solutions are being experimented upon which are ideal for agricultural projects, such as: Agricultural Warehouses, Composting areas, Farms etc.

Roofing for Agricultural Units

Roofing for Shopping malls:

Shopping centers and malls are often open long hours and receive consistent foot traffic. It is critical to the businesses to install those materials that are sustainable. Options such as  Flat roofs, sloped roofs, Polyurethane Foam, Built-up Roofs, Modified Bitumen, Single-Ply, Shingle roofs, Tile, Asphalt Shingles, Fiberglass Shingles etc. are some of the popular roofing methods in this sector.

oofing for Shopping malls

Roofing for Schools and colleges:

Schools buildings have particular design requirements in terms of spatial planning. There are always a specific set of designs for schools and auditoriums simultaneously. In the educational sector, the form of construction is typically academic buildings consisting of offices, lecture theaters, classrooms and laboratories. One of the key requirements for educational buildings are fast construction programmes. Steel roofing solution construction has achieved a strong market share in all types of educational buildings for the above reasons. Modular construction has become the dominant form of construction for larger student in school and colleges, particularly for metropolitan universities. EPDM roofing system which offers authentic durability and versatility, is one of the preferred types of roofing solution available in this sector. EPDM roofing systems are really easy to install, maintain and repair than most other types. EPDM roofing membrane remains flexible in all temperature type, ranging from -30°C to +30°C, which enables it to be installed in a variety of climates.

Roofing for Schools and colleges

Roofing for Industrial projects:

High quality and durable products meet most industrial building construction needs. The application areas could be; Industrial warehouses, Industrial complexes, Factories and distribution centers etc, Roofing applications such as modified bitumen, single-ply and other roofs with a variety of fluid coatings, including acrylic, asphalt, elastomeric etc. are some the preferred technique in this sector. Other than these a vivid range of translucent sheets that combine optimal light transmission, weather resistance, blocking of harmful UV rays, could be a preferred choice.

Roofing for Industrial projects

Roofing for Metros:

Roofing solutions are available in a wide range of models that support a broad variety of architectural styles in metros. Straight, simple shapes combine well with older styles. Roofing Sheets are dimensioned to your specifications and are available either as ready-to-install or ready-installed. The Trussless Roofing System seems to be the most convenient option in this sector. Not only this, solar photovoltaic roofs are also getting in demand, Delhi was the first station was the structure.

Roofing for Metros

Conclusion

The choice or roofing depends upon the architectural style and upon many other factors ranging from energy efficiency to sustainability. In the execution of the actual work, the roof is constructed according to design specifications and applying the good building practices and generally approved installation methods of the roofing industry. Correct and sufficiently frequent maintenance during the service life plays a critical role in the durability and functioning of a roofing system. The projected lifespan of a roof can only be realised when all the stages of the roof’s life cycle are executed correctly and in a predetermined manner.