Ready-to-use Concrete Mould Release Agent

2083
Concrete Mould Release Agent
Concrete Mould Release Agent ensures good fair-faced concrete structure

A chemical mould releasing agent prevents certain materials from adhering to each other. Not adding a release agent will cause these materials to bond, which then produces more problems in cleaning up and creating a perfect casting. They provide the critical barrier between a molding surface and the substrate, facilitating separation of the cured part from the mold. Without such a barrier in place, the substrate would become fused to the mold surface, resulting in difficult clean-up and dramatic loss in production efficiency. One such specially formulated chemical mould releasing agent is Fairmate’s SETRELEASE RU PREMIUM.

It is a specially formulated blend of biodegradable vegetable oil based concrete mould release agent, which is superior to conventional mould oil. The chemicals react with the alkali in the concrete to form a thin water repellent skin on the surface of the mould, thereby enabling easy stripping from concrete and protects steel and wooden formwork.

SETRELEASE RU is supplied as an off white colour, ready to use liquid. It reacts with the alkalis and water at the interface of the concrete and formwork to produce a thin film of lime soap, which breaks the bond enabling the formwork to be readily stripped. Excellent “off form” finish produces a clear reproduction of formwork texture and sharp concrete feature.

BENEFIT

  • It does not contain any mineral oil and hence it is not producing VOC.
  • Ensures good fair-faced concrete
  • Can be used on all type of formwork
  • Minimizes cleaning of shutters before re-use
  • Vegetable oil based, biodegradable and Non-toxic
  • Non-staining
  • Minimises cleaning of shutters before reuse
  • Can be used with steam curing
  • Reduces the incidence of air pocket and tendency of surface spalling of corners.
  • This product is not flammable & hence no such precaution is required during storage to avoid from fire except the normal storage conditions.
  •  It contains active ingredients which chemically combine with cement paste and make a soapy nature which can release the concrete very easily without any surface defects of concrete.
  • Can be used with steam curing
  • Provides a water repellent, rainproof, rust-inhibiting film to the formwork

USES

It provides quick, clean and easy stripping of moulds and formwork. Ensures high quality, fair-faced and stain-free concrete surface. Protects aluminium windows and door frames from plaster and mortar splashes.

PACKING & COVERAGE

It is supplied in 1, 5, 10, 50, 100, 200 Ltr drums. A coverage between 40 to 60 m²/litre is possible depending upon the porosity and texture of mould surface.

For more details visit: www.fairmate.com

Email: enquiry@fairmate.com