Fast-setting Seamless Polished Screed from Avcon Technics

6146
Fast-setting Seamless Polished Screed
Application of AVCRETE FLOW- PS

If you are planning on polishing a new or existing concrete floor, you need to evaluate the condition of the concrete surface. First off, you need to level the concrete. This accounts for any ground repairs that might be needed. To address the unevenness of the floor surface, the polishable floor screed is used. It levels out a concrete sub-base. It can be used in commercial and industrial facilities as a final finish where aesthetics and durability are desired. It is self-smoothing, hard-wearing and it can level industrial substrates and is ideal as a final finished layer. It can offer the right combination style and substance with high-quality finish.

The polished screed’s primary purpose is to give a smooth and level floor on which to lay your chosen floor finish. A polished screed can create your desired finish without the need to replace your entire substrate. It can be undertaken in the colour and finish of your choice, with an almost endless colour palette and both matte and high gloss options available. It also has extremely high durability from mechanical stress. There are a lot of new screed products on the market today, and choosing the correct one is pivotal. AVCON’s AVCRETE FLOW- PS is just that. The product caters to technical flooring solutions that balance the requirement of compliance & functionality of polished flooring.

It is a self-smoothening, single component screed system, pre-blended dry mix mortar consisting of Cement, Graded high-strength aggregates and performance polymers. Needs only water addition. Complying with the technical requirements of EN 13813 standards. AVCRETE FLOW- PS is applied to a minimum thickness of 5 mm thick onto new or old base concrete surface in sound condition.

The demand for polished concrete look in commercial and residential places is very high but unviable due to limitations of downsizing the facility operation. The product is manufactured considering these limitations with application processes suited for the installer. AVCRETE FLOW- PS is a fast-setting industrial grade, wear-resistant floor screed with aesthetic finishes. Finished surface has inherent gloss and with proper application meets the flatness standard SR1 as per BS.

AVCRETE FLOW- PS benefits;

  • Offers great flexibility while used on a project, where time is quite short and polishing can be taken up after completion of other civil, interior works
  • Easy to install, requires minimum tools and machines any flooring contractor can be guided to install the floor
  • It is touch dry in 2-3 hours and walkable after 12 hours and ready to accept full traffic after 48 hours
  • It can be grinded and polished or only polished or buffed and sealed stain resistant sealers

About AVCON Technics Pvt. Ltd.

Avcon is India’s first flooring company with ISO 9001-2015 certification in Concrete Floor Design, Manufacturing of Products and Projects Executions. With its in-house R&D & vast knowledge, it has developed a wide range of repair products. These products have become benchmarks in the flooring industry. The repeated customer association with some of the biggest brands is a testimony to the company’s excellent performance.

For more details about Seamless Ultra-Thin Self-smoothening Polishable Screed visit- https://avcontechnics.com/avcrete-flow-ps/